Hawking Technology Hawking HWPS1UG Manual do Utilizador

1.3.1 Print Server Network Functions Windows NT ServerNetWare ServerWindows 98Windows NTWorkstationWindows 2000Unix Print ServerPrint Server Becau

Click “Set” to save the wireless configuration.

7.11 SNMP Configuration Double Click the “SNMP” icon and the SNMP configuration window will pop-up. Contact: You can enter the print server admin

7.12 Admin Setup Wizard Click the “Wizard” icon on the tool bar and the setup wizard of the current selected print server will be shown on the

Step 2: Select to enable the required printing protocol. Please refer to section 7.8 for detailed information.

Step 3: Setup the IP address of the HWPS1UG and the DHCP server. Please refer to section 7.9 for detailed information. Step 4: Setup NetWare printin

Step 5: Setup AppleTalk printing. Please refer to section 7.5 for detailed information.

Step 6: Select the Wireless Adapter mode and set up wireless LAN settings. Please refer to section 7.10 for detailed information. Step 7: Click “Set”

7.13 Report Click the “Report” icon on the tool bar and the Report window will pop-up. The report lists basic information of all available prin

8. Web Management

1.3.2 Network Printing Functions for Clients Windows NT ServerNetWare ServerWindows 98Windows NTWorkstationWindows 2000Unix Print ServerClient Use

8.1 Introduction The HWPS1UG can be configured and managed via the Web. Through the Local Area Network, or even the Internet, an administrator can

8.2 Web Management of Print Server 8.2.1 Login You can use any Web Browser to review the status or configure the settings of the HWPS1UG. Afte

8.3 Device Status 8.3.1 System The System Information includes “Device Name,” “Print Server Name,” “Model Type,” “System Up Time,” “Firmware

8.3.2 Printer This page lists printer information for all printers connected to each of the HWPS1UG’s ports.

8.3.3 TCP/IP This page lists all TCP/IP settings which include your HWPS1UG’s “IP Address,” “Subnet Mask,” and “Gateway.” It also lists the HWPS

8.3.4 SMB This page lists the current SMB group name settings.

8.3.5 SNMP This page displays the current SNMP settings.

8.3.6 NetWare This page lists the HWPS1UG’s NetWare settings including “Polling Time,” “ Name of the File Server,” and “Queue Name of each Port.

8.3.7 AppleTalk This page lists the HWPS1UG’s AppleTalk settings including “AppleTalk Zone Names” and your “Printer Type.”

8.4 WIRELESS 8.4.1 Wireless Setup In order to enable the HWPS1UG’s wireless functions, you must first enable this feature on the print server.

Windows 98PTPPPrint ServerMIS-2P1P2P3P1Print ServerMIS-1 UNIX / Linux UNIX (includes HP/UX, SCO Unix, SunOS, Solaris, Unixware DECUnix, IBM AIX and ot

8.4.2.1 General Wireless Settings You can set the following wireless parameters to connect to the Hawking HWPS1UG print server. These parameters

Hoc” or “Infrastructure.” If you do not have a wireless access point and want to use peer-to-peer connection, you should choose to run the print serve

8.4.2.2 Encryption The HWPS1UG supports the WEP encryption standard to enhance the security of your wireless LAN. WEP is an authentication algori

WEP key will determine the amount of encryption used in your data transmission. The longer your key is, the more processing power is used which will

8.4.2.3 Site Survey You can use this Site Survey function to search for an available wireless access point. The following information will be lis

8.5 Web Setup Wizard 8.5.1 System You also can configure the “Print Server Name,” assign a name for each printer port of the HWPS1UG, and Ena

8.5.1.1 Admin Password This is where you set the Administrative user name and password for the print server. User Name / Password is used to authenti

8.5.1.2 Advanced Settings From the Advanced Settings page you can select to enable/disable each printing protocol or data protocol.

8.5.2 TCP/IP You can configure the print server to automatically get an IP from DHCP server or manually specify a static IP. The print server als

“Gateway,” and “DNS.” The HWPS1UG will assign a unique IP address for each client.

1.3.3 Network Printing Functions for a Network Server Windows NT ServerNetWare ServerWindows 98Windows NTWorkstationWindows 2000Unix Print ServerN

8.5.3 NetWare The HWPS1UG supports the NetWare Bindery Printing method. The print server periodically polls the NetWare server printer queues fo

NetWare Server is the name of the NetWare file server that provides printer queues. 8.5.4 AppleTalk

AppleTalk is a data communication protocol often used by Macintosh computers. The HWPS1UG can use these parameters to join the AppleTalk network and

8.5.6 Save Settings The “Save Settings” page will be displayed after you have finished and saved system configuration. You can click the “Save Se

8.6 System Tools 8.6.1 Load Default You can use this page to restore the factory default settings. All of your previous setup will be cleare

8.6.2 Upgrade Firmware You can upgrade new firmware for the HWPS1UG from this page. Click “Browse” to select the new firmware from your hard driv

9. IPP Printing

9.1 Introduction The IPP (Internet Printing Protocol) provides you with a convenient method for remote printing jobs via the TCP/IP protocol. The H

9.2 System Setup 9.2.1 Print Server Side It is not necessary to modify your IPP settings on the print server side. Make sure you know your print

9.2.2 Client Side You will need to perform Window’s standard Add New Printer procedure. To do this, select the “Network Printer” setting as shown i

1.4 Network Printing Environment Common network printing environments use the following: Windows Peer-to-Peer Network The client’s PPTP driver w

click “Next” and complete the remaining configuration settings to access the shared network printer.

10. Telnet Management

10.1 Introduction The HWPS1UG Print server can be configured and managed through Telnet.

10.2 Login Execute the Telnet client tool and connect to the print server IP. telnet 192.168.2.1 Then you will be prompted to enter the username and

10.3 Get Setting Values – “get” Command The “get” command is used to get the setting values of this print server. The format of the “get” command is

USER_PASSWORD=’1234’ username Login username admin# get username USER_NAME=’admin’ wlfunc Wireless LAN function is enabled or disabled 0: disabled

channel Channel number used by wireless LAN admin# get channel CHANNEL=11 wep The mode of WEP 0: disable 1: 64 bit WEP enabled 2: 128 bit WEP enable

key642 64 bit WEP key 2 admin# get key641 WEP64_KEY2=0123456789 key643 64 bit WEP key 3 admin# get key641 WEP64_KEY3=0123456789 key644 64 bit WEP

key1283 128 bit WEP key 3 admin# get key1283 WEP128_KEY3=0123456789 abcdef0123456789a key1284 128 bit WEP key 4 admin# get key1284 WEP128_KEY4=012

polling Polling interval (in second) of the print server for waiting printing jobs on the NetWare server admin# get polling PORT1_POLLTIME=3 aq1 Nam

Windows NT ServerWindows 98Windows 2000TCP/IPIPXTCP/IPPTPPPrintQueueNetWare Network (see below) NetWare 3.x/4.x/5.xWindows 98Windows 2000IPX / IPIPXIP

SNMPC The administrator contact information of this print server for SNMP admin# get SNMPC SNMP_CONTACT=’[email protected]’ SNMPL The installed lo

1: enable appletalk AppleTalk printing is enabled or disabled 0: disable 1: enable admin# get appletalk APPLE_ENABLE=0 SMBD SMB printing is enabled

0: disable 1: enable LPD LPR printing is enabled or disabled 0: disable 1: enable admin# get LPD LPD_ENABLE=1 IPP IPP printing is enabled or disable

10.4 Modifying the Setting Values – “set” Command The “set” command is used to modify the setting values of this print server. The format of the “se

wlfunc Enable or disable the wireless LAN function. The value should be “disabled”, “enabled” or “auto” set wlfunc auto wlmode Wireless LAN mode is

or “wep128” defkey Default WEP key number. The value should be 0~3. 0: key 1 1: key 2 2: key 3 3: key 4 set defkey 0 key641 64 bit WEP key 1. The va

10 digit Hex value key644 64 bit WEP key 4. The value should be 10 digit Hex value set key641 0123456789 key1281 128 bit WEP key 1. The value should

ip IP of the print server set ip ‘192.168.2.1’ gateway Default gateway of the print server set gateway ‘192.168.2. 254’ submask Subnet mask of the

printertype1 The type of the printer attached to this print server set printertype1 ‘LaserW riter’ SMBDG The name of the SMB group name that this pr

“enabled”. DHCP Enable or disable to get dynamic IP by DHCP. The value should be “disabled” or “enabled”. set DHCP disable appletalk Enable or disa

1.5 Contents of the User’s Manual Chapter 2 explains the HWPS1UG’s hardware installation and configuration. The following chapters 3, 4, 5, and 6

“enabled”. IPX Enable or disable NetWare Bindery printing The value should be “disabled” or “enabled”. set IPX enable LPD Enable or disable LPR pri

“enabled”.

10.5 Other Commands 10.5.1 ipconfig The “ipconfig” command is used to quickly get the IP settings (IP, subnet mask, default gateway) of the print

set argument value get argument ipconfig reboot exit

1.6 Firmware & Printing Function The print server provides a complete network printing solution. The feature set is listed below: PTPP (Peer-t

2. Hardware Installation 1. Unpack the HWPS1UG’s packaging and check all the items listed in section 1.2. 2. Connect the HWPS1UG to the printer

3. Windows Peer-to-Peer Network

FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to subpart J of Part 15 of the F

3.1 System Architecture The HWPS1UG supports Windows Peer-to-Peer network printing mode, which is suitable for most medium and small network envir

2. Client Installation and Configuration (refer to section 3 for more detailed information). Client users must install the Windows PTPP driver (Peer

3.2 Administrator Installation and Setup 3.2.1 Installation and Easy Setup Wizard WINDOWS 95/98/ME/NT/2000/XP 1) POWER ON: After you have cor

2. The Hawking Installation Windows manager will pop up on your screen as follows: 3. Click on “Setup Wizard” and the Setup program will proceed to

5. Click “Next,” to specify the destination folder where the HWPS1UG utility files will be installed. 6. Click “Next,” and select the components y

7. Click “Next,” to specify the program folder where the program icons will be added. 8. Click “Next” to start the utility file installation.

9. The “Print Server Utilities” program will finish installing. 10. After this installation is complete, please click on “Finish” to bring up the Ea

12. Once the Setup Wizard has verified your settings, please click on the “Next” button to continue. If there is a problem with your setup, the Prin

Password: admin 15. Once you have entered your login and password for the selected print server, the “General Settings” page will appear. The Gener

SMB Group Name: The Windows group name you wish to associate your print server with. Please click in the SMB Group Name box for more information. Pri

Table of Contents 1. INTRODUCTION TO THE HWPS1UG ... 6 1.1 Product Introduction...

Typically your IP Gateway is the IP address of your computer’s router or Internet gateway. The Wizard will try and automatically fill in this address

Ad-hoc Network: Use this wireless connection if you wish to connect to the print server directly, bypassing any routers or access points on your netw

Please press “Next” once you have set up your encryption method.

20. Summary of Setting Changes The following page is a summary of configuration changes that are going to be saved to the print server. Please pres

Please select the appropriate printer you wish to connect to the print server and press the “Install Printer” button. 22. The “Install Printer” pop u

23. Please select which option to choose and highlight the appropriate printer driver if it is present on the scrollable list of printer drivers. P

Once your printer is properly bound to the print server, you will see a RED checkmark by the installed printer indicating a successful installation.

25. The final configuration screen will allow you to print a test page using the newly installed print server. Please highlight the appropriate pr

3.2.2 Manual Printer Port Configuration WINDOWS 98/NT/Me/2000 Step1. Click the Start button, choose Setting è Printers Step2. Double click on A

Step5. Choose the Print Server’s Network Port, which was created by the administrator or client installation process, and click Next. Step6. Comple

6. UNIX SYSTEM NETWORK ... 67 6.1 Introduction...

WINDOWS XP Setup Step1. Click the Start button; choose Control Panel è Printers and Faxes Step2. Click on Add a Printer Step3. The Add Printer Wiz

Step5. In the “Select a Printer Port ” window select “Use the following port” and drag the selection bar down to your newly created print server entr

3.3 Administrator Utilities After the Administrator Installation is completed, there will be six utilities in print server’s Program folder. Netwo

3.4 Client Installation and Setup 1. Insert the CD shipped along with the HWPS1UG into your CD-ROM drive. The Autorun.exe program will execute

5. Click “Next” and specify the program folder where the program icons will be added. 6. Click “Next” to start the installation.

7. Once the software installation is complete, the client wizard will allow you to connect your HWPS1UG to your printer. 8. The next screen allows

Please select the appropriate printer you wish to connect to the print server and press the “Install Printer” button. 9. The “Install Printer” pop up

Once your printer is properly bound to the print server, you will see a RED checkmark by the installed printer indicating a successful installation.

12. The final configuration screen will allow you to print a test page using the newly installed print server. Please highlight the appropriate pr

3.5 Client Utilities After Client Installation is completed, there will be three tools located in the print server’s Program folder. 1) Network Po

8.3.2 Printer... 113 8.3.3 TCP/IP...

If you have just installed another new print server on your network, you must run this program first. This program will search for new print server

Please be aware that Network Ports Quick Setup Utility can only detect and configure all print servers on the same network; it cannot search and confi

Step3. Press OK to add the remote printer port into your computer’s printer ports. In order to use the remote printing function, you will have to

4. Windows NT/2000 Network

4.1 System Architecture Peer-to-Peer network printing and Server-Based Printing is available for machines using the Windows NT/2000 server. Only

4.2 Windows NT/2000 Server Installation and Setup Please follow the procedures described below for installation of a peer-to-peer connection (PTPP

Step3. Share the above server’s printer with the network by performing the standard Windows printer sharing installation process.

4.3 User Installation and Setup After the server side installation is completed, the client side will be able to find the server’s shared print

5. NetWare Network

1. Introduction to the HWPS1UG

5.1 System Architecture We implemented the NetWare printer sharing functionality in the HWPS1UG, to allow one or more printers attached to the pri

Relief of NetWare’s file server burden. Each print server should log into a NetWare server before servicing the print jobs. Each print server will occ

5.2 NetWare 3.x/4.x/5.x Installation & Setup Once your print server is connected to your Ethernet network, you can set it up for use with your

5. Select the Print server in the Printing mode field. 6. Change the Alias of the print server if you wish. 7. Set the Primary File Server to be

14. You have now successfully created the print queue that your print server will serve. Press the Escape key until the Available Options main me

19. Select “Printer Configuration.” 20. Select Printer 0 (or Printer 1, Printer 2), and press Enter, then select Parallel LPT1 (or LPT2, LPT3) in

24. Repeatedly press Escape to exit the PCONSOLE program. 25. Reset the print server to have the changes take effect. NOTE: If the print server

6. UNIX System Network

6.1 Introduction The HWPS1UG can use TCP/IP printing through the Unix lpd (Line Printer Daemon) protocol. The lpd protocol is based on the BSD ve

6.2 Enable The HWPS1UG’s TCP/IP Support The default configuration of the HWPS1UG has TCP/IP support enabled. You can configure the HWPS1UG to enab

1.1 Product Introduction Congratulations on purchasing Hawking’s HWPS1UG 1 USB Port Wireless G Print Server. The Hawking HWPS1UG is a powerful an

6.3 Setup the HWPS1UG’s IP Address The print server must have a unique IP address in order to be recognized by the network. You can set up the IP

following BOOTP configuration. To rebuild the NIS map, please refer to your system documentation. To configure the IP address data for the BOOTP serve

Node ID: 0000B4010101 (this implies Ethernet address is 0000B4010101), IP address: 203.66.191.12 The entry for this print server in the /etc/bootptab

6.4 Verify the HWPS1UG’s IP Address To verify that your print server is responding to the newly assigned IP address, use a PING command to check t

6.5 Configure Remote lpd Printing on the Host You can use this procedure to configure your Unix host(s) to allow printing to your network. The pr

chgrp daemon /var/spool/lpd/pserverd chmod 775 /var/spool/lpd/pserverd 3. Add an entry to the host’s /etc/printcap file, similar to the following: pr

7. Configuration Utility

7.1 Introduction This chapter introduces the HWPS1UG’s system configuration utility in a Windows environment. This utility is automatically instal

Wireless Configuration: Wireless LAN Configuration SNMP Configuration: Configuration through the SNMP protocol Setup Wizard: Guide You Through All the

7.2 Search – Search for All Available Print Servers After you start up Hawking’s HWPS1UG configuration utility, click the “Search” icon on the t

1.2 Product Package

7.3 Status - Print Server Status Click the “Status” icon on the tool bar to view the current status of the selected print server. Information ab

You can restart the print server by pressing the “Reboot” button.

7.4 Setting up the Print Server Click the “Setup” icon on the tool bar and the setup items of the current selected print server will be display

7.5 AppleTalk Configuration Double Click on the “ AppleTalk” icon and the AppleTalk configuration window will appear. AppleTalk is a data commu

you want to share your printer with every workstation in every Zone, you should enter an “*” in the “Zone Name” field. Printer Type: This is the type

7.6 General Configuration Double Click the “General” icon and the General configuration window will be displayed. You can see basic print server

User Name / Password is used to authenticate the administrator through the Web administration tool.

7.7 Netware Print Server Configuration Double Click on the “ NetWare” icon and the NetWare configuration window will be displayed. The HWPS1UG

waiting on the NetWare server. You have to assign a printer queue for each printer port of the HWPS1UG. NetWare Server is the name of the NetWare file

7.8 System Configuration Double Click “System” icon and the System configuration window will be displayed. From the System configuratio n page, y

1.3 Network Printing Architecture This section illustrates how a print server functions over a network environment. Before you install and use th

Port Name: This is the name of your printer port. Each printer port needs to be assigned a name. The client utility uses this name to access the prin

7.9 TCP/IP Configuration

Double Click the “TCP/IP” icon and the TCP/IP configuration window will appear. You can configure the print server to automatically get its IP address

7.10 Wireless Configuration If you wish to use the print server’s wireless LAN capabilities, please set up the HWPS1UG print server through an Ether

have a wireless network currently running and wish to use a peer-to-peer wireless connection, please select “Ad Hoc Mode.” After selecting the wireles

This is a list of scanned available wireless access points. Select an access point in the list to connect to and click “Next.” If you cannot find the

In Ad Hoc mode, you can let the HWPS1UG automatically associate with other wireless stations or manually assign the SSID of your wireless network. Yo

The list displays active available wireless stations. Select the wireless station you wish to connect to from the list and click “Next.” If you canno

If you want to use WEP encryption to protect your wireless network, you have to select “ON” to enable the “Wireless Security” function. The wireless

You can select to allow the print server to automatically obtain your network’s IP settings with the DHCP client feature or manually assign the IP se